P410 Checklist

Please enter the email you'd like correspondence sent to.

Step 1. Place the desired elements in the element column.
Step 2. Tick the groups that element/s belongs too. (Note Group 2 & 3 have common elements)
Step 3. Check constraints to see if lamp can be made.

Group 1 - Dy, Er, Eu, Ge, Gd, Ho, La, Lu, Hf, Nd, Pr, Ru, Os, Sc, Sn, Tb, Th, Tm, U
Group 2 - Ba, Cs, K, Na/K, Rb, Sr
Group 3 - Ba, Be, Ca, Ca/Mg, Ce, Cs, Na, Na/k, Rb, Rh, K, Sm, SrÂ
Group 4 - As, Bi, Hg, Pb, Te, Tl, Cu/Zn, Zn
Group 5 - Al, B, Sb, Cd, Cr, Co, Cu, Ga, Au, In, Ir, Fe, Mg, Mn, Mo, Ni, Nb, Pd, P, Pt, Re, Se, Si, Ag, Ta, Ti, W, V, Yb, Y, Zr, Six Multi(Co/Cu/Mn/Cr/Fe/Ni)

Analysis of your selection
For the P410 to be possible columns 1 & 2 must have no more than two ticks in each.
Also If there is a tick in column 3 then there must be no ticks in column 4 or vica versa.
Column 5 elements have no restraints.

Note:
Please re-do the checklist after each change of element.
Lithium (Li) must be a single cathode lamp as it has a unique fill gas.
Mercury (Hg) can only be combined with Group 4 & 5
For Multi-Element cathode application sources please request a quote.

Email service@photron.com.au for a 100% confirmation that the application source is possible.

This checklist is a guide only.